Will an Anker SOLIX Solarbank 3 E2700 Pro run an LED TV? (EU)
Yes, it runs it — no usable-capacity figure see why below ↓
Every check passes. Nothing here has a locked rotor to publish an inrush figure for, so the absence of one is a fact about the hardware rather than a hole in the library.
Official spec + Derived by WattPairverified 2026-08-01EU unit × LED TV
Running108 Wof1,200 Wcontinuous output
0 – 1,200 W across the rails above
No start-up rail: this load has no locked rotor to publish an inrush for, so no start-up demand was checked.
Two numbers decide this, and readers use them interchangeably: watts are the ceiling on what the inverter holds at any instant, watt-hours are how much energy the battery holds. A machine can have plenty of one and not enough of the other.
The verdict is a calculation, not a lookup. What it will not do is print a runtime, and the reason is specific: we have found no published depth of discharge or inverter efficiency for the EU build, so there is no usable-capacity figure to divide.
Where those numbers come from
A blank is never left blank. A field we have found no figure for says so, and a field whose sources disagree — two documents, or one document with itself — says that instead of picking one.
No usable-capacity figure for this machine
Anker SOLIX states a nameplate watt-hour number for it, and we have found no published depth of discharge or inverter efficiency for the EU build. Dividing the nameplate by this load would be wrong by 20–35% in the flattering direction, so this page shows the nameplate for what it is and refuses to turn it into hours.
Missing: station.usable_capacity_wh
The surge ceiling on this page is ours, not the manufacturer’s
We have found no published surge rating for the EU build. So the start-up check runs against the continuous output instead — an inverter cannot surge below what it sustains, which makes that the safest number we can defend. Real inverters usually manage 1.5–2× their continuous rating, so a start-up call held back by this figure may well be fine in practice; we are not going to say so until the manufacturer does.
Energy rate instead of a runtime
108 Wh per hour averaged over this load’s duty cycleThis number needs no battery figure at all, which is why this page can give it when it cannot give hours. Divide any usable-capacity figure you trust by it and you have your own runtime, with our arithmetic visible instead of hidden.
What an LED TV demands
What the Anker SOLIX Solarbank 3 E2700 Pro offers
This figure is ours, not the brand’s: the continuous rating used as a conservative floor because we have found no surge rating for the EU build.
Where to buy
Where to buy the Anker SOLIX Solarbank 3 E2700 Pro
Prices checked 2026-08-01 · checked 17 days ago
If this is not the pairing
BLUETTI Elite 30 V2 (EU 230 V) reaches the same conclusion on an LED TV at 600 W continuous, and it is €219. Cheaper is only cheaper when the answer is the same — this one is. See that pairing →
The same load on the machines beside it
The same machine on the loads beside it
Where to go next
An LED TV has a dedicated guide: the same records this page computes from, worked through in prose with room for the reasoning a table can only summarise — How many watts does a TV use, and how long will a power station run one?