What will a Jackery Explorer 1000 Plus run? (US 120 V)
A “2,000 W” power station is two numbers wearing one label. Watts are the ceiling on what you can switch on at once; watt-hours are how much energy is in the battery. The Jackery Explorer 1000 Plus holds 2,000 W and stores 1,264.6 Wh on the nameplate — and those two facts answer two different questions.
This page answers the first one. Jackery publishes no depth of discharge or inverter efficiency for this model, so there is no defensible usable-capacity figure, and this page will not turn the nameplate into hours.
The three numbers that decide everything else
Continuous output2,000 W
Official spec · verified 2026-08-01 · high confidence
Surge ceiling4,000 W
Official spec · verified 2026-08-01 · high confidence
Nominal capacity1,264.6 Wh
Official spec · verified 2026-08-01 · high confidence
No usable-capacity figure for this model
The brand publishes a nameplate watt-hour number and nothing about depth of discharge or inverter efficiency. Dividing the nameplate by a load would be wrong by 20–35%, so this page shows the nameplate for what it is and refuses to turn it into hours.
Missing: station.usable_capacity_wh
official · verified 2026-08-01 · US 120 V unit
What Jackery Explorer 1000 Plus runs
Every row is a live calculation against this machine's continuous output, surge ceiling and
inverter waveform — running watts, start-up inrush and duty cycle on the appliance side. Of 30 appliance profiles, 16 run, 6 are a tight fit and 8 are out of reach. The percentage is the
load as a share of continuous output; anything past 82% drops out of the green.
The binding constraint is voltage, not watts: open-circuit voltage RISES as it gets colder, and
an array that is fine at noon can be over the MPPT ceiling at dawn. Each row is the engine's
largest legal array for this station, with Voc corrected to -10 °C ambient
. Only panels whose datasheet publishes a voltage temperature coefficient are evaluated — the
others cannot be corrected, and an under-corrected array is what destroys an MPPT input.
Jackery SolarSaga 100 Air 5 × 100 W · 5 in parallel · 500 W array
Voc at the design minimum: 32.3 V
Panel connector: DC8020
Renogy 100W 12V Monocrystalline Solar Panel (Compact Design) 8 × 100 W · 2S4P · 800 W array
Voc at the design minimum: 53.4 V
Panel connector: Solar Connectors
Renogy 200W 12V Monocrystalline Solar Panel 2 × 200 W · 2 in parallel · 400 W array
Voc at the design minimum: 29.6 V
Panel connector: MC4Needs a mc4-to-dc8mm adapter.
Every field we hold on this machine
Each figure carries the tier it came from and the date it was checked. A blank is never left
blank: a field the manufacturer does not publish says so, and a field two manufacturer sources
disagree about says that instead of picking one.
AC output
What the inverter can hold, what it can start, and what shape the wave is.
Continuous output2,000 W Official spec · verified 2026-08-01 · high confidence
Surge ceiling4,000 W Official spec · verified 2026-08-01 · high confidence
Surge durationNot published by the manufacturer no figure to date
Boost modeNot published by the manufacturer no figure to date
Boost outputNot published by the manufacturer no figure to date
The verdict engine never counts boost output as continuous output: it works by dropping voltage and can fail on motors and compressors.
Inverter waveformPure sine wave Official spec · verified 2026-08-01 · medium confidence
Inverter efficiencyNot published by the manufacturer no figure to date
AC voltage120 V Official spec · verified 2026-08-01 · high confidence
AC frequency60 Hz Official spec · verified 2026-08-01 · high confidence
Outlet standardNEMA 5-15R Official spec · verified 2026-08-01 · medium confidence
UPS switchover20 ms Official spec · verified 2026-08-01 · high confidence
Idle drawNot published by the manufacturer no figure to date
What the machine consumes just being switched on. It sits in the runtime denominator, and a brand that does not publish it makes every runtime optimistic.
Battery and energy
The nameplate, what is actually retrievable from it, and how long the cells last.
Nominal capacity1,264.6 Wh Official spec · verified 2026-08-01 · high confidence
Usable capacityNot published by the manufacturer no figure to date
Not published, and not derivable: the brand states neither depth of discharge nor inverter efficiency for this model.
Depth of dischargeNot published by the manufacturer no figure to date
ChemistryLiFePO4 (LFP) Official spec · verified 2026-08-01 · high confidence
Cycle life4,000 cycles Official spec · verified 2026-08-01 · high confidence
Capacity at end of cycle life70% Official spec · verified 2026-08-01 · high confidence
Warranty5 years Official spec · verified 2026-08-01 · high confidence
Discharge temperature (min)-10 °C Official spec · verified 2026-08-01 · high confidence
Discharge temperature (max)45 °C Official spec · verified 2026-08-01 · high confidence
Charge temperature (min)0 °C Official spec · verified 2026-08-01 · high confidence
Charging and expansion
How fast it refills from the wall, and whether more battery can be bolted on.
AC input (max)Not published by the manufacturer no figure to date
Wall charge, 0–100%102 min Official spec · verified 2026-08-01 · high confidence
Wall charge, 0–80%Not published by the manufacturer no figure to date
Car input (max)Not published by the manufacturer no figure to date
Combined input (max)Not published by the manufacturer no figure to date
ExpandableYes Official spec · verified 2026-08-01 · high confidence
Capacity with expansion5,000 Wh Official spec · verified 2026-08-01 · medium confidence
Extra batteries supported3 Official spec · verified 2026-08-01 · high confidence
Solar input
The window an array has to land inside. Voltage is the constraint that burns hardware.
Solar input (max)800 W Official spec · verified 2026-08-01 · high confidence
MPPT window (min)12 V Official spec · verified 2026-08-01 · high confidence
MPPT window (max)60 V Official spec · verified 2026-08-01 · high confidence
Input current (max)22 A Official spec · verified 2026-08-01 · high confidence
Solar connectorJackery DC8020 Official spec · verified 2026-08-01 · medium confidence
Physical and travel
Weight, size, noise — and whether an airline will let it on board.
Weight14.5 kg Official spec · verified 2026-08-01 · high confidence
Length356 mm Official spec · verified 2026-08-01 · high confidence
Width260 mm Official spec · verified 2026-08-01 · high confidence
Height283 mm Official spec · verified 2026-08-01 · high confidence
NoiseNot published by the manufacturer no figure to date
App controlYes Official spec · verified 2026-08-01 · high confidence
ConnectivityWi-Fi, Bluetooth Official spec · verified 2026-08-01 · high confidence
Capacity for airline rules1,264.6 Wh Official spec · verified 2026-08-01 · high confidence
IATA lets passengers carry lithium batteries up to 100 Wh freely and 100–160 Wh with airline approval. Above that, no passenger aircraft.
Where to buy
Out of stock at the official store · checked 2026-08-01
Out of stock at the official store when we checked on 2026-08-01. We are not sending you to a sold-out page with a buy button on it — the link below goes to the product page, where you can set a restock alert.
Each link goes to that machine's own record. Every record holds the same fields in the
same order and states the same tier and date beside each one, so two of them read
side by side compare cleanly.
Where to go next
Questions people ask about this machine
Will a Jackery Explorer 1000 Plus run a full-size refrigerator?
Yes. Against the US 120 V record, the full-size refrigerator draws 55 W running · 286 W at start-up — 2.8% of this machine's continuous output. That verdict is a calculation from running watts, start-up surge and inverter waveform, not a lookup, and the full working is one click away in the table above.
Why can't a Jackery Explorer 1000 Plus run an electric kettle?
On the US 120 V record the binding constraint is the continuous output. The electric kettle needs 3,000 W running · 3,000 W at start-up, and at 150% of continuous output there is no headroom to give. No accessory fixes this one — it takes a machine with a bigger inverter.
How long will a Jackery Explorer 1000 Plus run my appliances?
We will not put a number on it, and that is deliberate. A runtime needs a usable-capacity figure, and Jackery publishes no depth of discharge or inverter efficiency for this model — only a nameplate watt-hour rating. Dividing that nameplate by your load produces a confident-looking figure that is typically 20–35% too high. What this page gives you instead is every load's energy rate in watt-hours per hour, which needs no battery figure at all and is the number you actually size against.
How long does a Jackery Explorer 1000 Plus take to charge?
Jackery states 102 minutes from empty to full on mains power. That is a manufacturer figure measured under their conditions, verified on 2026-08-01; a cold battery, a weak circuit or a lower charge-rate setting all make it longer.
Can you take a Jackery Explorer 1000 Plus on a plane?
No. At 1,264.6 Wh it is far above the 160 Wh ceiling that airlines apply to lithium batteries in the cabin, and lithium batteries of this size are not accepted in checked baggage either. The 100 Wh / 160 Wh thresholds come from the IATA dangerous-goods rules that carriers implement; check your airline before travelling, because the approval step above 100 Wh is theirs to give.