Will a Jackery Explorer 1000 v2 run a CPAP machine? (EU 230 V)
Tight fit — no usable-capacity figure see why below ↓
This load’s manufacturer asks for a pure sine wave and we read 8 of Jackery’s own published documents on 2026-08-08 and found no inverter waveform for the EU 230 V build in them. The watts are not the problem — the refusal to assume a waveform is.
Official spec + Derived by WattPairverified 2026-08-09EU 230 V unit × CPAP machine
Running22 Wof1,500 Wcontinuous output
0 – 1,500 W across the rails above
No start-up rail: this load has no locked rotor to publish an inrush for, so no start-up demand was checked.
Two numbers decide this, and readers use them interchangeably: watts are the ceiling on what the inverter holds at any instant, watt-hours are how much energy the battery holds. A machine can have plenty of one and not enough of the other.
The verdict is a calculation, not a lookup. What it will not do is print a runtime, and the reason is specific: we have found no published depth of discharge or inverter efficiency for the EU 230 V build, so there is no usable-capacity figure to divide.
This page answers an electrical question, not a medical one.
Where this page puts hours on a pairing, that figure is how long a power station’s battery lasts running this machine’s wattage — an electricity calculation, not a judgment about whether a break in therapy is safe. A small watt figure alone does not settle a verdict here either: this machine also carries a documented waveform requirement, and a station with no waveform on record is held at a tight fit regardless of how easily it clears the watts.
Where a verdict below reads a tight fit — the amber triangle on a row in the list of stations — read it as don’t rely on this pairing, whatever reason the row gives for that particular verdict, and not as a compromise likely to hold anyway. That state means the same thing here however it was arrived at: this site cannot clear the pairing with confidence, and that isn’t a passing grade with a footnote. Where a row says a check could not be run at all, that is a weaker claim than a near miss, not a stronger one.
What to do about a power interruption during therapy is a question for a clinician, the durable medical equipment (DME) supplier who set the machine up, or the manufacturer’s own guidance for it — not for this site. For the electricity side of an outage plan, this page can help: what a station needs to run this machine at all, and — where both makers publish enough to work it out — how long a given battery keeps it running.
Where those numbers come from
A blank is never left blank. A field we have found no figure for says so, and a field whose sources disagree — two documents, or one document with itself — says that instead of picking one.
No usable-capacity figure for this machine
Jackery states a nameplate watt-hour number for it, and we have found no published depth of discharge or inverter efficiency for the EU 230 V build. Dividing the nameplate by this load would be wrong by 20–35% in the flattering direction, so this page shows the nameplate for what it is and refuses to turn it into hours.
Missing: station.usable_capacity_wh
Energy rate instead of a runtime
22 Wh per hour averaged over this load’s duty cycleThis number needs no battery figure at all, which is why this page can give it when it cannot give hours. Divide any usable-capacity figure you trust by it and you have your own runtime, with our arithmetic visible instead of hidden.
What a CPAP machine demands
The inverter is loaded to 44 VA — 22 W ÷ 0.50 — which is the quantity its ceiling is actually measured against.
What the Jackery Explorer 1000 v2 offers
Where to buy
In stock at the official store · checked 2026-08-18
Where to buy the Jackery Explorer 1000 v2
Prices checked 2026-08-17
If this is not the pairing
Jackery Explorer 1000 Plus (EU 230 V) — 2,000 W continuous · from €999. See that pairing →
Anker SOLIX C300 (EU 230 V) reaches the same conclusion on a CPAP machine at 300 W continuous, and it is €269.99. Cheaper is only cheaper when the answer is the same — this one is. See that pairing →
The same load on the machines beside it
The same machine on the loads beside it
Where to go next
A CPAP machine has a dedicated guide: the same records this page computes from, worked through in prose with room for the reasoning a table can only summarise — How many nights can a power station run my CPAP?