Will an Anker SOLIX C300 run a well pump? (EU 230 V)
Exceeds output — nothing to time — it will not run see why below ↓
The load is more than this inverter can sustain. 660 W against 300 W continuous — 220% of it. No accessory closes a gap that size — it takes a bigger inverter.
officialverified 2026-08-01EU 230 V unit × well pump
EcoFlow DELTA Pro 3 (EU 230 V) — 4,000 W continuous · from €3,299. See that pairing →
Two numbers decide this, and readers arrive using them interchangeably. Watts are the ceiling on what the inverter can hold at any instant — a well pump needs 660 W of them while it runs, and 6,762 W for the instant it starts. Watt-hours are how much energy the battery holds, and the Anker SOLIX C300 holds 288 Wh of them on the nameplate. A machine can have plenty of one and not enough of the other.
The verdict above is a calculation — running watts, start-up inrush and inverter waveform against this machine's continuous output and surge ceiling — not a lookup. What it will not do is print a runtime, and the reason is specific: there is nothing to time. A runtime for a load this machine will not start is a figure about nothing.
Where those numbers come from
Every figure below carries the tier it came from and the date it was checked. A blank is never left blank: a field the manufacturer does not publish says so, and a field whose sources disagree — two documents, or one document with itself — says that instead of picking one.
No usable-capacity figure for this machine
Anker SOLIX publishes a nameplate watt-hour number and nothing about depth of discharge or inverter efficiency for this model. Dividing the nameplate by this load would be wrong by 20–35% in the flattering direction, so this page shows the nameplate for what it is and refuses to turn it into hours.
Missing: station.usable_capacity_wh
Energy rate instead of a runtime
660 Wh per hour while it is actually runningThis number needs no battery figure at all, which is why this page can give it when it cannot give hours. Divide any usable-capacity figure you trust by it and you have your own runtime, with our arithmetic visible instead of hidden.
What a well pump demands
The engine checked 6,762 W — where a record publishes both an absolute inrush and a multiple of running power, the more demanding of the two is used rather than the flattering one.
The inverter is loaded to 1,158 VA — 660 W ÷ 0.57 — which is the quantity its ceiling is actually measured against.
Start-up figure Manufacturer nameplate (locked-rotor)
The start-up figure is the manufacturer’s own locked-rotor rating, off a spec sheet for a real model in this class — not a category multiple. Where a standards table and the nameplate disagree, this library uses the nameplate: the standards figure is a selection envelope for breakers and controllers, and sizing a battery to it over-specifies the machine by two to four times.
What the Anker SOLIX C300 offers
What this page is not going to sell you
There is no buy button on this page, and that is the finding rather than an omission: the Anker SOLIX C300 does not run a well pump. A price here would be a sale, not an answer.
If this is not the pairing
The same load on the machines beside it
The same machine on the loads beside it
Where to go next
A well pump has a guide of its own: the same records this page computes from, worked through in prose with room for the reasoning a table can only summarise — How do I power an off-grid shed or cabin?