Every check passes: 60 W running against 300 W continuous. Nothing here has a locked rotor to publish an inrush figure for, so the absence of one is a fact about the hardware rather than a hole in the library.
official · verified 2026-08-01 · EU 230 V unit × electric blanket
Nominal capacity288 Wh
Surge headroom10×+
Two numbers decide this, and readers arrive using them interchangeably. Watts are the ceiling on what the inverter can hold at any instant — an electric blanket needs 60 W of them while it runs. Watt-hours are how much energy the battery holds, and the Anker SOLIX C300 holds 288 Wh of them on the nameplate. A machine can have plenty of one and not enough of the other.
The verdict above is a calculation — running watts, start-up inrush and inverter waveform against this machine's continuous output and surge ceiling — not a lookup. What it will not do is print a runtime, and the reason is specific: Anker SOLIX publishes no depth of discharge or inverter efficiency for this model, so there is no usable-capacity figure to divide.
Where those numbers come from
Every figure below carries the tier it came from and the date it was checked. A blank is never
left blank: a field the manufacturer does not publish says so, and a field whose sources
disagree — two documents, or one document with itself — says that instead of picking one.
No usable-capacity figure for this machine
Anker SOLIX publishes a nameplate watt-hour number and nothing about depth of discharge or inverter efficiency for this model. Dividing the nameplate by this load would be wrong by 20–35% in the flattering direction, so this page shows the nameplate for what it is and refuses to turn it into hours.
Missing: station.usable_capacity_wh
Energy rate instead of a runtime
60 Wh per houraveraged over this load’s duty cycle
This number needs no battery figure at all, which is why this page can give it when it cannot give hours. Divide any usable-capacity figure you trust by it and you have your own runtime, with our arithmetic visible instead of hidden.
What an electric blanket demands
Running power60 W Official spec · verified 2026-08-01 · high confidence
Duty cycle100% Official spec · verified 2026-08-01 · low confidence
What the Anker SOLIX C300 offers
Continuous output300 W Official spec · verified 2026-08-01 · high confidence
Surge ceiling600 W Official spec · verified 2026-08-01 · high confidence
Nominal capacity288 Wh Official spec · verified 2026-08-01 · high confidence
Yes. 60 W of running draw against 300 W of continuous output — 20% of it. The verdict is computed from running watts, start-up inrush and inverter waveform — the working is in the evidence section above.
How long will an Anker SOLIX C300 run an electric blanket?
We will not put a number on it, and that is a finding rather than a gap. Anker SOLIX publishes no depth of discharge and no inverter efficiency for this model — only a nameplate watt-hour rating. Dividing that nameplate by this load produces a figure that is typically 20–35% too high while looking exactly as authoritative as a real one. What this page gives instead is the load's energy rate in watt-hours per hour, which needs no battery figure at all.
Why is there no runtime on a page that says yes?
Because "yes it runs it" and "yes for this long" are two different claims with two different evidence requirements, and this machine only supports the first. The verdict needs a continuous rating and a surge ceiling, which Anker SOLIX publishes. Hours need a usable-capacity figure, which it does not. Twenty of the twenty-six machines in our library are in that position, and the alternative — nameplate watt-hours divided by label watts — is the single most common wrong number on this topic.